Korenix 6852G Series User Manual Download Page 903

Page: 903 / 1246

Korenix Technology Co., Ltd.

Industrial

Layer 3 Managed Ethernet Switch

_____________________________________________________________________________

Industrial Layer 3 Managed Ethernet SwitchUser Manual

Page: 903/1246

9.2.17.4

Configuring DNS Cache Summary Page

The Domain Name System (DNS) dynamically maps domain name to Internet (IP) addresses. This
panel displays the current contents of the DNS cache.

Non-Configurable Data

Domain Name List

- The domain name associated with this record.

IP address

- The IP address associated with this record.

TTL

- The time to live reported by the name server.

Flag

- The flag of the record.

Command Buttons

Refresh

- Refresh the page with the latest DNS cache entries.

Clear All

- Clear all entries in the DNS cache.

Summary of Contents for 6852G Series































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6852G Series

Reviews:

Related manuals for 6852G Series

Brands by name

Popular brands

Korenix 6852G Series, User Manual

Search results

Summary of Contents for 6852G Series

Reviews:

Related manuals for 6852G Series

Brands by name

Popular brands