Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 318/1246
URL Redirect Mode:
Indicates whether the Redirect URL Mode is enabled or disabled.
Max Bandwidth Up(bytes/sec):
The maximum rate in bytes per second (bps) at which a client can
send data into the network.
Max Bandwidth Down (bytes/sec):
The maximum rate in bps at which a client can receive data
from the network.
Max Input Octets (bytes):
The maximum number of octets the user is allowed to transmit.
Max Output Octets (bytes):
The maximum number of octets the user is allowed to receive.
Max Total Octets (bytes):
The maximum number of octets the user is allowed to transfer, i.e., the
sum of octets transmitted and received.
Session Timeout (seconds):
Shows the number of seconds a user is permitted to remain
connected to the network. Once the Session Timeout value is reached, the user is logged out
automatically. A value of 0 means that the user does not have a session Timeout limit.
Idle Timeout(seconds):
Shows the number of seconds the user can remain idle before the switch
automatically logs the user out. A value of 0 means that the user will not be logged out automatically.
6.8.1.19
show captive-portal interface [slot/port] client status
This command displays information about clients authenticated on all interfaces or a specific interface.
Syntax
show captive-portal interface [<slot/port>] client status
Default Setting
None
Command Mode
Privileged Exec
Display Message
Interface:
Valid slot and port number separated by a forward slash.
Interface Description:
Describes the interface.
Client MAC Address:
Identifies the MAC address of the wireless client (if applicable).
If you use the optional [slot/port] information, the following additional information appears:
Client IP Address:
Identifies the IP address of the wireless client (if applicable).
CP ID:
Shows the captive portal ID the connected client is using.
CP Name:
Shows the name of the captive portal the connected client is using.
Protocol:
Shows the current connection protocol, which is either HTTP or HTTPS.
Verification:
Shows the current account type, which is Guest, Local, or RADIUS.
User Name:
Displays the user name (or Guest ID) of the connected client.
