Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 236/1246
6.3.12
DHCPv6 Client Commands
6.3.12.1
ipv6 address protocol
This command specifies the network of IPv6 configuration protocol to be used . If you modify this value,
the change is effective immediately.
Syntax
ipv6 address protocol {dhcp6 | none}
<dhcp6>
- Obtains IPv6 address from DHCPv6.
<none>
- Obtains IPv6 address by setting configuration.
Default Setting
None
Command Mode
Interface-Vlan Config
6.3.12.2
ipv6 dhcp6 restart
This command is used to initiate a DHCPv6 client request by the network interface.
Syntax
ipv6 dhcp6 restart
Default Setting
None
Command Mode
Global Config
