Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1020/1246
Guest VLAN Period(secs)
- This field displays the configured guest Vlan period for the selected
port. The guest Vlan period is the value, in seconds, of the timer used by the GuestVlan
Authentication. The guest Vlan period is a number in the range of 1 and 300.
Supplicant Timeout(secs)
- This field displays the configured supplicant timeout for the selected
port. The supplicant timeout is the value, in seconds, of the timer used by the authenticator state
machine on this port to timeout the supplicant. The supplicant timeout is a value in the range of 1 to
65535.
Server Timeout(secs)
- This field displays the configured server timeout for the selected port. The
server timeout is the value, in seconds, of the timer used by the authenticator on this port to timeout
the authentication server. The server timeout is a value in the range of 1 to 65535.
Maximum Requests
- This field displays the configured maximum requests for the selected port.
The maximum requests value is the maximum number of times the authenticator state machine on
this port will retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The
maximum requests value is in the range of 1 to 10.
VLAN Assigned
- Displays the VLAN ID assigned to the selected interface by the Authenticator.
Note: This field is displayed only when the port control mode of the selected interface is not
MAC-based
VLAN Assigned Reason
- Displays the reason for the VLAN ID assigned by the authenticator to the
selected interface. Possible values are:
Radius
Unauth
Default
Not Assigned
Reauthentication Period(secs)
- This field displays the configured reauthentication period for the
selected port. The reauthentication period is the value, in seconds, of the timer used by the
authenticator state machine on this port to determine when reauthentication of the supplicant takes
place. The reauthentication period is a value in the range of 1 to 65535.
Reauthentication Enabled
- This field displays if reauthentication is enabled on the selected port.
This is a configurable field. The possible values are 'true' and 'false'. If the value is 'true'
reauthentication will occur. Otherwise, reauthentication will not be allowed.
Key Transmission Enabled-
This field displays if key transmission is enabled on the selected port.
This is not a configurable field. The possible values are 'true' and 'false'. If the value is 'false' key
transmission will not occur. Otherwise Key transmission is supported on the selected port.
Control Direction
- This displays the control direction for the specified port. The control direction
dictates the degree to which protocol exchanges take place between Supplicant and Authenticator.
This affects whether the unauthorized controlled port exerts control over communication in both
directions (disabling both incoming and outgoing frames) or just in the incoming direction (disabling
only the reception of incoming frames). This field is not configurable on some platforms.
Maximum Users
- Displays the maximum number of clients that can get authenticated on the port in
the MAC-based dot1x authentication mode. This field is configurable. The maximum users value is in
range of 1 to 16.
Unauthenticated VLAN ID
- Displays the Unauthenticated VLAN ID for the selected port. The valid
range is 0 to 4093.
Session Timeout
- Displays the Session Timeout set by the RADIUS Server for the selected port.
Note: This field is displayed only when the port control mode of the selected port is not MAC-based
Session Termination Action
- Displays the Termination Action set by the RADIUS Server for the
selected port. Possible values are:
