Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 431/1246
This command configures the Voice VLAN capability on the interface.
Syntax
voice vlan { <vlanid-id> | dot1p <priority> | none | untagged }
no voice vlan
<vlan-id>
- Configure the IP phone to forward all voice traffic through the specified VLAN.
<dot1p>
- Configure th IP phone to use 802.1p priority tagging for voice traffic and to use the default
native VLAN (0) to carry all traffic. The valid <priority> range is 0 to 7.
<none>
- Allow the IP phone to use its own configuration to send untagged voice traffic.
<untagged>
- Configure the phone to send untagged voice traffic.
no
- This command disables the Voice VLAN capability on this switch.
Default Setting
Disabled
Command Mode
Interface Config
6.11.2.5
voice vlan data priority
Use this command to either trust or entrust the data traffic arriving one the Voice VLAN port.
Syntax
voice vlan data priority untrust | trust
Default Setting
trust
Command Mode
Interface Config
