Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 387/1246
<servername> -
Server name
<port> -
Port number (Range: 1
– 65535)
no -
This command is used to remove the configured RADIUS authentication server or the RADIUS
accounting server. If the 'auth' token is used, the previously configured RADIUS authentication
server is removed from the configuration. Similarly, if the 'acct' token is used, the previously
configured RADIUS accounting server is removed from the configuration. The <ipaddr> parameter
must match the IP address of the previously configured RADIUS authentication / accounting server.
Default Setting
None
Command Mode
Global Config
6.8.4.82
radius sever key
This command is used to configure the shared secret between the RADIUS client and the RADIUS
accounting / authentication server. Depending on whether the
'auth'
or
'acct'
token is used, the shared
secret will be configured for the RADIUS authentication or RADIUS accounting server. The IP address
provided must match a previously configured server. When this command is executed, the secret will be
prompted. The secret must be an alphanumeric value not exceeding 20 characters.
Syntax
radius server key {acct | auth} <ipaddr|ipv6addr|hostname> [encrypted <password>]
<ipaddr|ipv6addr| hostname > -
is a IPv4/IPv6 address or hostname.
<password>
is the password in encrypted format.
Default Setting
None
Command Mode
Global Config
