Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 62/1246
6.2.1.7
capabilities
This command is used to set the capabilities on specific interface.
i
The 10G SFP+ and 1G SFP interfaces do not provide the following command.
Syntax
capabilities {{10 | 100 } {full-duplex | half-duplex}} | {1000 full-duplex }
no capabilities {{10 | 100 } {full-duplex | half-duplex}} | {1000 full-duplex }
10 -
10BASE-T
100 -
100BASE-T
1000 -
1000BASE-T
full-duplex -
Full duplex
half-duplex -
Half duplex
no -
This command removes the advertised capability with using parameter.
Default Setting
10G full-duplex for 10G SFP+ ports
1G full-duplex for 1G SFP ports
Command Mode
Interface Config
This command is used to set the capabilities on all interfaces.
Syntax
capabilities all {{10 | 100} {full-duplex | half-duplex}} | {1000 full-duplex }
no capabilities all {{10 | 100} {full-duplex | half-duplex}} | {1000 full-duplex }
10 -
10BASE-T
100 -
100BASE-T
1000 -
1000BASE-T
full-duplex -
Full duplex
half-duplex -
Half duplex
all -
This command represents all interfaces.
