Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 568/1246
Non-Conform Action:
The current setting for the action taken on a packet considered to not
conform to the policing parameters. This is not displayed if policing not in use for the class under this
policy.
Non-Conform DSCP Value:
This field displays the DSCP mark value if this action is markdscp.
Non-Conform IP Precedence Value:
This field displays the IP Precedence mark value if this action
is markprec.
Assign Queue:
Directs traffic stream to the specified QoS queue. This allows a traffic classifier to
specify which one of the supported hardware queues are used for handling packets belonging to the
class.
Drop:
Drop a packet upon arrival. This is useful for emulating access control list operation using
DiffServ, especially when DiffServ and ACL cannot co-exist on the same interface.
Mirror:
Copies a classified traffic stream to a specified egress port (physical port or LAG). This can
occur in addition to any marking or policing action. It may also be specified along with a QoS queue
assignment.
Redirect:
Forces a classified traffic stream to a specified egress port (physical port or LAG). This
can occur in addition to any marking or policing action. It may also be specified along with a QoS
queue assignment.
Policy Name:
The name of this policy. (Note that the order in which the policies are displayed is not
necessarily the same order in which they were created.)
Policy Type:
The policy type, namely whether it is an inbound or outbound policy definition.
Class Members:
List of all class names associated with this policy.
