Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 23/1246
2.5.4
Quick Start up IP Address
To view the network parameters the operator can access the device by the following three methods.
Simple Network Management Protocol - SNMP
Telnet
Web Browser
Table 2-4. Quick Start up IP Address
Command
Details
show ip interface
Displays the Network Configurations
Interface Status
– Indicates whether the interface is up or
down.
IP Address - IP Address of the interface
Default IP is 192.168.2.1
Subnet Mask - IP Subnet Mask for the interface. Default is
255.255.255.0
Default Gateway - The default Gateway for this interface
Default value is 0.0.0.0
Burned in MAC Address - The Burned in MAC Address used for
inband connectivity
Network Configurations Protocol Current - Indicates which
network protocol is being used. Default is none
Management VLAN Id - Specifies VLAN id
Web Mode - Indicates whether HTTP/W eb is enabled.
Java Mode - Indicates whether java mode is enabled.
ip address
(Config)#
interface vlan 1
(if-vlan 1)#
ip address <ipaddr> <netmask>
(if-vlan 1)#
exit
(Config)#
ip default-gateway <gateway>
IP Address range from 0.0.0.0 to 255.255.255.255
Subnet Mask range from 0.0.0.0 to 255.255.255.255
Gateway Address range from 0.0.0.0 to 255.255.255.255
Displays all of the login session information
