Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 584/1246
6.22
IPv6 ACL Command
6.22.1
Show Commands
6.22.1.1
show ipv6 access-lists
This command displays an IPv6 access list and all of the rules that are defined for the IPv6 ACL. Use the
[name] parameter to identify a specific IPv6 ACL to display.
Syntax
show ipv6 access-lists [<name>]
<name>
-
ACL name which uniquely identifies the IPv6 ACL to display.
Default Setting
None
Command Mode
Privileged EXEC
User EXEC
Display Message
Rule Number:
The ordered rule number identifier defined within the IPv6 ACL.
Action:
The action associated with each rule. The possible values are Permit or Deny.
Match All:
Indicates whether this access list applies to every packet. Possible values are True or
False.
IPv6 Protocol:
The protocol to filter for this rule.
Source IP Address:
The source IP address for this rule.
Source L4 Port Keyword:
The source port for this rule.
Destination IP Address:
The destination IP address for this rule.
Destination L4 Port Keyword:
The destination port for this rule.
IP DSCP:
The value specified for IP DSCP.
Flow Label:
The value specified for IPv6 Flow Label.
Log:
Displays when you enable logging for the rule.
Assign Queue:
The queue identifier to which packets matching this rule are assigned.
Mirror Interface:
The slot/port to which packets matching this rule are copied.
Redirect Interface:
The slot/port to which packets matching this rule are forwarded.
Time Range Name:
Displays the name of the time-range if the Ipv6 ACL rule has referenced a
time range.
Direction:
Shows whether the ACL is applied to traffic coming into the interface (ingress) or leaving
