Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1086/1246
Action
- Specify what action should be taken if a packet matches the rule's criteria. The choices are
permit or deny.
Logging
- When set to 'True', logging is enabled for this ACL rule (subject to resource availability in
the device). If the Access List Trap Flag is also enabled, this will cause periodic traps to be
generated indicating the number of times this rule was 'hit' during the current report interval. A fixed 5
minute report interval is used for the entire system. A trap is not issued if the ACL rule hit count is
zero for the current interval. This field is visible for a 'Deny' Action.
Time Range Name
- Select the time range name to be associated with the MAC ACL rule. On
selecting the option 'other' from the list, a non-existing time range name can be specified in the "Time
Range Name (other)" field.
Assign Queue ID
- Specifies the hardware egress queue identifier used to handle all packets
matching this ACL rule. Valid range of Queue Ids is (0 to 7).
Mirror Interface
- Specifies the specific egress interface where the matching traffic stream is copied
in addition to being forwarded normally by the device. This field cannot be set if a Redirect Interface
is already configured for the ACL rule. This field is visible for a 'Permit' Action.
Redirect Interface
- Specifies the specific egress interface where the matching traffic stream is
forced, bypassing any forwarding decision normally performed by the device.
CoS
- Specifies the 802.1p user priority to compare against an Ethernet frame. Valid range of values
is (0 to 7).
Destination MAC
- Specifies the destination MAC address to compare against an Ethernet frame.
Valid format is (xx:xx:xx:xx:xx:xx). The BPDU keyword may be specified using a Destination MAC
address of 01:80:C2:xx:xx:xx.
Destination MAC Mask
- Specifies the destination MAC address mask specifying which bits in the
destination MAC to compare against an Ethernet frame. Valid format is (xx:xx:xx:xx:xx:xx). The
BPDU keyword may be specified using a Destination MAC mask of 00:00:00:ff:ff:ff.
Ethertype Key
- Specifies the Ethertype value to compare against an Ethernet frame.
Valid values are
Appletalk
ARP
IBM SNA
IPv4
IPv6
IPX
MPLS multicast
MPLS unicast
NetBIOS
Novell
PPPoE
Reverse ARP
User Value
Ethertype User Value
- Specifies the user defined customised Ethertype value to be used when the
user has selected "User Value" as Ethertype Key, to compare against an Ethernet frame. Valid
range of values is (0x0600 to 0xFFFF).
