Korenix Technology Co., Ltd.
Industrial
Layer 3 Managed Ethernet Switch
_____________________________________________________________________________
Industrial Layer 3 Managed Ethernet SwitchUser Manual
Page: 1226/1246
9.7.6.6
Configuring IGMP Proxy Interface Configuration
Selection Criteria
Interface
- Select the port for which data is to be displayed or configured from the pull down
menu. You must have configured at least one router interface before configuring or displaying
data for an IGMP Proxy interface and it should not be a IGMP routing interface. This field is
configurable only when interface mode is disabled.
Configurable Data
Interface Mode
- Select enable or disable from the pull down menu to set the administrative
status of IGMP Proxy on the selected interface. The default is disable. Routing, IGMP and
Multicast global admin modes should be enabled to enable IGMP Proxy interface mode.
Version
- Enter the version of IGMP you want to configure on the selected interface. Valid
values are (1 to 3) and the default value is 3. This field is configurable only when IGMP Proxy
interface mode is enabled.
Unsolicited Report Interval
- Enter the unsolicited time interval value in seconds. The
Unsolicited Report Interval is the time between repetitions of a host's initial report of membership
in a group. Valid values are from (1 to 260). The default value is 1.
Command Buttons
Submit
- Update the switch with the values on the screen. If you want the switch to retain the
new values across a power cycle you must perform a save.
