Komatsu PC350LC-8, Operation & Maintenance Manual

Page: 399 / 502

ATTACHMENTS AND OPTIONS
ATTACHMENT GUIDE
6-27
ATTACHMENT COMBINATIONS 6
WARNING
Depending on the type or combination of work equipment, there is danger that the work equipment may
hit the cab or machine body.
When using unfamiliar work equipment for the first time, check before starting if there is any danger of
interference, and operate with caution.
PC350LC, PC350NLC
This table lists the combination of attachments which can be installed to the long arm (standard), short arm and
extension arm.
{
: Material weight up to 1.8 t/m
3
: Material weight up to 1.5 t/m
3
U
: Material weight up to 1.2 t/m
3
_: Cannot be used
NOTICE
q
When the long arm is equipped, if the bucket is pulled in to the machine body, the arm interferes with
the body. Operate the long arm carefully.
q
When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage.
Operate the boom carefully.
Categories of use
For general digging: Digging or loading sand, gravel, clay etc.
For light duty digging: Digging or loading dry, uncaked earth and sand, mud etc.
For loading work: Loading dry, loose earth and sand
q
For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durabil-
ity and high wear resistance be employed.
The items marked * are for when the side cutter is installed.
BUCKET AND ARM COMBINATION ARM LENGTH
Width
(without side cutters)
Capacity
(SAE, PCSA heaped)
Weight
(without side cutters)
2.2m 2.6m 3.2m 4.0m
800mm
0.85 m
3
880 kg
{ { { {
1.000mmt
1.13m
3
1.010 kg
{ { { {
1.200mm
1.42m
3
1.160 kg
{ { {
1.400mmt
1.75 m
3
1,290 kg
{ { {
1.500mm
1.87 m
3
1,350 kg
{ { {
1,600mm
2.02m
3 1,400 kg
{ { {
U
1,800mm
2.32 m
3 1.520 kg _