Komatsu PC350LC-8, Operation & Maintenance Manual

Page: 409 / 502

ATTACHMENTS AND OPTIONS
2-PC BOOM
6-37
BEFORE STORAGE POSTURE WHEN LEAVING MACHINE 6
When leaving the operator’s compartment, put the machine in
the following posture for reasons of safety.
1. When leaving the machine for a long time see ,LONG
TERM STORAGE (3-199) for instructions on correct
preparation of machine for long term storage.
2. When leaving the machine for a short time.
TESTING AND ADJUSTING 6
INSPECTION AND MAINTENANCE
To use the machine safely, and to prevent failures before they occur, always carry out checks before starting and
periodic maintenance.
The locations for periodic inspection are as shown in the diagram below.
P
B
A
B
A
R
A Cracks at end of weld (checks before starting).
P R Play, wear of pins (every 1000 Hours).
B Furrows in base metal (checks before starting).