Komatsu PC350LC-8, Operation & Maintenance Manual

Page: 254 / 502

TRANSPORTATION
OPERATION
3-190
Stowing Radio Antenna
q
Loosen bolt (2) of radio antenna (1) at the rear of the cab,
lower the antenna, then tighten bolt (2) again to secure
radio antenna (1) in position.
q
When unloading the machine from the trailer and operating
it, follow the opposite procedure from stowing to set radio
antenna (1) vertical, then secure it in position with bolt (2).
Rearview Mirrors
The mirrors are at the positions shown in the diagram on the
right.
If they are damaged, or are to be removed for shipment, or are
to be installed again, use the following procedure.
q
After installing the mirrors, be sure to adjust them, referring
to “Rearview Mirrors (3-134)“.
Removal
q
Mirrors (A), (B)
1. Loosen mounting bolt (2), then remove mirror (1) from sup-
port (3).
2. Loosen bolt (4) and remove support (3) and clamp (5) from
the handrail.
q
Mirror (C)
3. Loosen locknut (2), then remove mirror (1) from bracket
(3).
4. Remove bolt (4), then remove bracket (3) from the
machine.