DETAILED CONTROLS AND GAUGES
OPERATION
3-92
EMERGENCY ESCAPE HAMMER
3
CAUTION
If it is necessary to break the window glass with the hammer, be extremely careful not to injure yourself on
the flying pieces of broken glass.
To prevent injury, remove the broken pieces of glass remaining in the frame before escaping through the
window. Be careful also not to slip on the broken pieces of glass.
If it should become impossible to open the cab door for any
reason, and it is necessary to make an emergency escape
from the operator's compartment, use hammer (A) to escape.
To escape from the operator's cab, use hammer (A) to break
the glass and escape through the window.
DOOR LOCK
3
WARNING
q
Before the releasing the door lock, always stop the machine on flat ground.
q
Never release the door lock on a slope. The door may suddenly close and cause injury.
q
When releasing the door lock, do not extend your body or hands outside the machine and do not put
your hands on the door frame. The door may suddenly close and cause injury.
Use the door lock to fix the door in position after opening it.
1.
Push the door against catch (1) to lock it in position.
2.
When closing the door, push down the lever (2) on the left
of the operator's seat to release the catch.
3.
When attaching the door in position, lock it firmly to the
catch.
Summary of Contents for PC350LC-8
