Komatsu PC350LC-8, Operation & Maintenance Manual

Page: 199 / 502

OPERATION
MACHINE OPERATIONS AND CONTROLS
3-135
Mirror (B)
Adjust the mirror mount so that it is possible to see people at
the rear right of the machine.
q
Install the side view mirror in the location indicated in the
figure at right.
(M): 125 mm
q
If the side view mirror does not move smoothly when
adjusting its angle, loosen mirror securing bolt (4) and mir-
ror securing stay bolt (5).
Tightening torque of bolt (4): 4.0 - 5.4 Nm
(0.41 - 0.55 kgm)
q
When adjusting the side view mirror angle, make an adjust-
ment so that the side of the machine comes into view on
the mirror as shown in the figure at right.
Mirrors (C)
Adjust the side view mirrors so that people around 1 m away
from the machine can be seen.
(W): 1 m
q
If side view mirror (C) does not move smoothly when
adjusting its angle, loosen mirror securing screw (6).
Tightening torque of screw (6): 0.98 - 1.47 Nm
(0.10 - 0.15 kgm)