OPERATION
MACHINE OPERATIONS AND CONTROLS
3-163
WORKING MODE
3
Working Mode
Use working mode selector switch (1) to select the working mode that matches the operating conditions or pur-
pose. This will make it possible to carry out operations efficiently.
Use the following procedure to select the most efficient working mode.
When the starting switch is turned ON, the working mode is set to the mode that was in operation when the starting
switch was last turned OFF.
Use the working mode switch to set the mode to the most effi-
cient mode to match the type of work.
NOTICE
If breaker operations are carried out in a mode other than the breaker mode, there is danger of breakage of
the hydraulic equipment. Do not carry out breaker operations in any mode except the breaker mode.
1.
If working mode selector switch (1) is pressed, the working
mode selection screen is displayed on the monitor.
Working
mode
Applicable operations
P mode
Normal digging or loading operations (operations
with emphasis on production)
E mode
Normal digging or loading operations (operations
with emphasis on fuel consumption)
L mode
Aligning position (fine control operations)
B mode
Breaker operations
ATT mode
Operations with the crusher or other double-act-
ing action attachment
Summary of Contents for PC350LC-8
