Komatsu PC350LC-8, Operation & Maintenance Manual

Page: 140 / 502

DETAILED CONTROLS AND GAUGES
OPERATION
3-76
Starting Switch
Starting switch (1) is used to start or stop the engine.
(A): OFF position
The key can be inserted or withdrawn. Switches for the electri-
cal system (except room lamp), are all turned off and the
engine is stopped.
(B): ON position
Electric current flows through the charging and lamp circuits.
Keep starting switch key in the ON position while the engine is
running.
(C): START position
This is the engine-start position. Keep the key at this position during cranking. Immediately after starting the
engine, release the key. It will automatically return to the ON position (B).
Fuel Control Dial
Dial (2) adjusts the engine speed and output.
(a) Low idling (MIN): Turned fully to the left
(b) Full speed (MAX): Turned fully to the right
Lamp Switch
Switch (3) is used to turn on the LH deck lamp, RH deck lamp,
Boom LH lamp, Boom RH lamp (if equipped), CW lamp (if
equipped) and monitor lighting.
(a) Night position: Lamps light up and monitor illumination is set
to night mode
(b) Day position: Lamps light up and monitor illumination is set
to day mode
(c) OFF position: Lamps go out.
(The monitor illumination is set to day mode.)