Komatsu PC350LC-8, Operation & Maintenance Manual

Page: 176 / 502

DETAILED CONTROLS AND GAUGES
OPERATION
3-112
Method of Operating Mode
q
(BAS) Bass adjustment: When button (2) is pressed, BAS is displayed on display (7). If knob (1) is turned
clockwise within 5 seconds, the bass sound is emphasized. If the knob is turned counterclockwise, the bass
sound is reduced.
q
(TRE) Treble adjustment: When button (2) pressed, TRE is displayed on display (7). If knob (1) is turned
clockwise within 5 seconds, the treble sound is emphasized. If the knob is turned counterclockwise, the treble
sound is reduced.
q
(BAL) Balance adjustment: When button (2) is pressed, BAL is displayed on display (7). If knob (1) is turned
clockwise within 5 seconds, the sound from the right speaker is increased. If the knob is turned counterclock-
wise, the sound from the left speaker is increased. When it is set to BAL 0, the sound from the left and right
speakers is balanced.
REMARK
With each mode, the display is returned automatically to its original setting after 5 seconds.
Setting Correct Time
1. Press display selector button (4) to display the time.
After 5 seconds, the display will return to the frequency dis-
play and the time cannot be corrected. If this happens,
press display selector button (4) again.
2. Press time adjustment button (8) to select Hour or Minute.
H button: Adjusts the hour (each time the button is
pressed, the time advances by one hour)
M button: Adjusts the minute (each time the button is
pressed, the time advances by one minute)
If the H or M button is kept pressed, the time will advance
continuously until the button is released.
ADJ button: When the ADJ button is pressed, the time is
reset as follows.
When display is 00 - 05 minutes, time is returned to 00
min. 00 sec. (No change in hour)
When display is 55 - 59 minutes, time is advanced to 00
min. 00 sec. (Hour advances)
When display is 06 - 54 minutes, time cannot be reset.
(Time stays same)
Example
10:05
J
10:00
10:59
J
11:00
10:26
J
10:26
Use the H, M, and ADJ buttons to set to the correct time.