Kikusui KHA3000, Operation Manual, Page: 284 / 392

284
KHA3000
Overview of Messages
Query
Device settings and status can be queried.
Attach a question mark (?) at the end of the program header part. If a query has a parameter,
insert a space after the question mark and continue to code a parameter.
Example:
SENSe:CURRent:RANGe? MINimum
String termination
Every command must be terminated with a valid terminator.
Terminators include <line feed> (ASCII 0x0A) and EOI (end or identify). When either one is
specified, it works as a terminator.
Always use <line feed> for the RS232C because EOI is not available.
When a command string is finished, the path is always reset to the root level.
Common commands
p. 288
The IEEE-488.2 and SCPI standards define a series of common commands used for
resetting and self-diagnosis. Each of the common commands always begins with an asterisk
(*) and may have one or more parameters.
When two queries are sent in separate lines, read the response to the first query before
transmitting the second line. If two lines of queries are sent at the same time, an incomplete
response may be received.
CR (ASCII 0x0D) is not a terminator.
See