Kikusui KHA3000, Operation Manual, Page: 89 / 392

4
KHA3000
89
System
Setup
Updating the firmware version and Maintenance
This menu is used to update the firmware version of this product. For details, contact your
Kikusui distributor or agent.
When
“ Yes ” is selected without preparing for updating the firmware version, the dialog box
“ Disk Error. Media could not be detect ed.” is displayed. Because the firmware version is not
update, press the OK function key to return to the previous state.

Procedures for inputting a character (F1 key) and deleting a character (F2
key)
1
Press the F5 (Maintenance) key.
The password dialog will be presented.
2
Use the small knob, large knob or arrow keys to select a character by
moving the rectangular frame.
3
Press the F1 (Input 1-char) key.
The character selected will be added to the part where the cursor is blinking (Input 1-
char). To delete a character, press the F2 (Delete 1-char) key. To change the character
type, press the F3 (Change char type) key to select the type. To repeat adding or
deleting characters, return to the above step 2.
4
Press the ENTER key.
The characters entered will be fixed and saved.
No. Menu item Description Default
1 Version up This menu is used to update the firmware version of this product. A
dialog box asking
“ Are you sure? ” appears with answer options
“ Yes, ” “ No, ” and “ Cancel. ” If you select “ Yes ” without preparing to
upgrade the version, a dialog box stating “ Disk Error. Media could
not be detecte d” appears. Because version upgrading is not
possible under this condition, press the F1 key (OK) to return.
–
2 Input 1-char Used to enter a character for a password. Up to 20 alphanumeric
characters or up to 10 hiragana or katakana characters can be input.
The procedure is shown below. –
3 Delete 1-char Used to delete a character from the password. The procedure is
shown below. –
4 Change char type Used to change the character type of the password. The character
types (alphanumeric, hiragana, katakana) change each time the F3
key is pressed. –
5 Return Terminates character input, character deletion and character type
change. –
6 Prev/Next Page 3/3 Switches to another menu page. –
F key: Function key. You can also use the ESC key to return.
F4
Version up
F5
Maintenance
F1
Input 1-char
F2
Delete 1-char
F3
Change char type
Alphanumeric
Hiragana
Katakana
F6
Return
F6
F1 Yes
F2 No
F3 Cancel
1
3
2
4
5
6
Menu 3/3
Prev/Next
Page 3/3