Kikusui KHA3000, Operation Manual, Page: 375 / 392

KHA3000
375
Appx
Error List
Query error list
An error in the [-499, -400] range indicates that the output queue control of the measuring
instrument detected a problem in the message exchange protocol explained in IEEE 488.2
Section 6. If an error in this class occurs, the query error bit (bit 2) of the event status register
is set.
Operation completion event error list
The errors/events in the [-899, -800] range are used when this product needs to report the
IEEE488.2 operation completion event, which is generated when the synchronization protocol
of the instrument enabled by the *OPC command completes every selected operation in
standby.
This event also sets the operation completion bit (bit 0) in the standard event status register.
List of errors specific to this product
Error code Explanation of error message
-400 Query error (generic) A generic query error of this product that is used when other types of error do
not apply.
-410 Query INTERRUPTED An INTERRUPTED query error as defined by IEEE 488.2 (6.3.2.3) occurred.
-420 Query UNTERMINATED An UNTERMINATED query error as defined by IEEE 488.2 (6.3.2.2) occurred.
-430 Query DEADLOCKED A DEADLOCKED query error as defined by IEEE 488.2 (6.3.1.7) occurred.
-440 Query UNTERMINATED
after indefinite response Another query is specified after a query that generates an undefined response
in a same program message.
Example:
*IDN?;SYST:ERR?
Error code Explanation of error message
-800 Operation complete Operation complete
Error code Explanation of error message
+100 Operation denied due to
instrument specific error Operation is denied because of an error specific to the measuring instrument.
+101 Operation denied while in
LOCal state Operation is denied because local mode operation in progress.
+102 Operation denied while test is
running Operation is denied because test operation is in progress.
+103 Operation denied while in
PROTection state Operation is denied by the protection function.