Kikusui KHA3000, Operation Manual, Page: 302 / 392

302
KHA3000
Harmonic Measurement Mode (General)
HARM:NOM:VOLT
Sets the nominal voltage. Set the nominal voltage according to the rating of the EUT.
Executing this command simultaneously sets VFL:NOMinal:VOLTage at the same value.
Command
HARMonics:NOMinal:VOLTage <NRf>
HARMonics:NOMinal:VOLTage?
Parameter Value: 100, 120, 200 or 100 to 300 (The default is 230)
Unit: V
Response
Returns the nominal voltage value in the <NR3> format.
Setting the Margin
HARM:MARG
Sets the margin for the limit value. Set a relative value of the reference limit value (100). For
instance, specify 80 to set the margin to 80 % of the reference limit value.
Command
HARMonics:MARGin {<numeric>|MIN|MAX}
HARMonics:MARGin?
Parameter Value: 10 to 100 (The default is 100.)
Unit: PCT
Response
Returns the margin in the <NR3> format.
Setting the Measurement Time
HARM:MTIM
Sets the measurement time.
Command
HARMonics:MTIMe {<numeric>|MIN|MAX}
HARMonics:MTIMe?
Parameter Value: 1 to 9600 (The default is 150.)
Unit: S
Response
Returns the measurement time in the <NR3> format.
Comment Input
HARM:TEXT:COMM
Specifies comment items and sets comment texts. The ten types of comment items listed
below can be specified. The character string for each comment item is subjected to character
code encoding (normally Shift-JIS) that is set by the
“ SYST:CONFigure:TEXT:Encoding ”
command and further subjected to base64 encoding. This double encoding ensures a secure
** RST RST
** RST RST
** RST RST
** RST RST