Kikusui KHA3000, Operation Manual, Page: 56 / 392

56
KHA3000
Using the Line Impedance Network
Use the Line Impedance Network in harmonic current tests (JIS C61000-3-2) and voltage
fluctuation tests (IEC Standards 61000-3-3 and 61000-3-11).
p. 214
Line Impedance Network is not equipped with the following impedance networks used for limit
value standard IEC 61000-3-11:
• 0.25

+ jn0.25

(single-phase)
• 0.15

+ jn0.15

(three-phase)
• 0.10

+ jn0.10

(three-phase neutral line)
For information on the connection terminals of the Line Impedance Network and how to select
line impedance networks, refer to the Operation Manual of the Line Impedance Network.
Limit value standard Setting of the Line Impedance Network
JIS C61000-3-2
Bypass(THRU)
*1
or
Z1 (0.4

+ 0.37 mH): Nominal voltage 100 V (single-phase)
Z2 (0.38

+ 0.46 mH): Nominal voltage 200 V (single-phase)
The standard specifies that this impedance network can be used when
“ the measurement result may fluctuate. ” (Attachment A)
*1. Bypass(THRU) for the LIN1020JF or LIN3020JF Line Impedance Network
OUT (THRU) for the LIN40MA-PCR-L
IEC 61000-3-3 Z3(0.40

+ jn0.25

(single-phase)
0.24

+ jn0.15

(three-phase)
0.16

+ jn0.10

(three-phase)
IEC 61000-3-11 0.24

+ jn0.15

(three-phase)
0.16

+ jn0.10

(three-phase)
See
• The wiring have impedance inherently. In a test system, attention must be paid to the
requirements of IEC 61000-4-7 (voltage drop caused by wiring impedance).
• PCR-WE cannot be combined with a standard line impedance network. For the line
impedance network for PCR-WE, contact your Kikusui distributor or agent.