Kikusui KHA3000, Operation Manual, Page: 383 / 392

KHA3000
383
Appx
Report Printing Format
Terms used for the Report Printing Format
This section explains the meanings of terms used for report printing formats. Terms defined in
the related standards are excluded from the explanation.
Harmonics
Related standard Wiring method Term Meaning
Common Common Final Test result General judgment result
PASS, Pass The result is acceptable.
FAIL, Fail The result is not acceptable.
WARN, Warn The result is acceptable but the specified
margin is exceeded.
Order Harmonic order (2nd to 40th; 1st order is a
fundamental.)
Lim1[Arms] Limit value
Lim2[Arms] 150 % or 200 % of the limit value
AVE[Arms] Average value in the measurement time
MAX[Arms] Maximum value in the measurement time
Judge Judgment for each harmonic order
Three-phase L1 Test Result Judgment result of the L1 input phase
L2 Test Result Judgment result of the L2 input phase
L3 Test Result Judgment result of the L3 input phase
Total Current Total current of all input phases
Total Power Total power of all input phases
Total Power Factor Total power factor of all input phases
Total Apparent power Total apparent power of all input phases
Total Reactive Power Total reactive power of all input phases
IEC 61000-3-2
Ed3.0 Single-phase,
Three-phase limitOver[s] The length of time (seconds) during which
150 % of the limit value is exceeded
IEC 61000-3-12 Single-phase,
Three-phase Ave[%] Reading(In/Iref)
Ave[%] Reading(In/I1)
Average value in the measurement time and its
ratio to the reference current
Average value in the measurement time and its
ratio to the reference fundamental current
Max[%] Reading(In/Iref)
Max[%] Reading(In/I1)
Maximum value in the measurement time and
its ratio to the reference current
Maximum value in the measurement time and
its ratio to the reference fundamental current
Ave[Arms] Reading Average value in the measurement time
Max[Arms] Reading Maximum value in the measurement time
Iequ Rated current of the EUT
Iref
I1 Reference current
Reference fundamental current
Judgment Rsce Rsce value used for judgment
Limit values Limit values to be applied
Ssc Short-circuit power (calculated value)
Sequ Rated apparent power of equipment (calculated
value)
Z System impedance (calculated value)