Kikusui KHA3000, Operation Manual, Page: 231 / 392

10
KHA3000
231
O
bs
er
va
tio
n,
A
na
ly
si
s
an
d
Ju
dg
em
en
t o
f V
ol
ta
ge
F
lu
ct
ua
tio
ns
Displaying the Vf-Observation and Analysis
Display (Vf-VIEW)
Display the Vf-Observation and Analysis display (Vf-VIEW)
(switching displays)
1
Press the Vf key.
The Vf key LED illuminates and the Vf-Test Conditions List display appears.
2
Press the VIEW key in the Vf-Test Conditions List display.
The VIEW key LED illuminates and the Vf-Observation and Analysis display (Vf-VIEW)
appears.
3
Press the VIEW key again.
The screen switches between the Vf-Observation and Analysis display (Vf-VIEW) and
Vf-Observation and Test Conditions display (toggle operation).
If the display does not appear by pressing the Vf key
A dialog box “ Can ’ t execute during test/analysis. Please operate it after ending ” is displayed
and the display switches to the test ending menu.
p. 220
While the test status display (in the upper left of the screen, “ Set ” in the case of the
figure shown above) is “ Test ” or “ Analysis, ” pressing the Vf key does not display the Vf-
Test Conditions List display. Because displaying the Vf-Test Conditions List display
starts a new test with the test conditions changed, the test that has been executed
needs to be terminated.
4
Press the F3 key (Exit) in the test ending menu.
The test ends. The test status display on the screen switches from “ Analysis ” to “ Set. ” If
the test results have not been saved with the F1 key (Save), a dialog box and a menu
for saving operation appear. To save the test results, select F1 (Yes); otherwise, select
F2 (No).
5
Press the Vf key.
The Vf key LED illuminates and the Vf-Test Conditions List display appears.
6
Press the View key.
The VIEW key LED illuminates and the Vf-Observation and Analysis display (Vf-VIEW)
appears.
See