Kikusui KHA3000, Operation Manual, Page: 37 / 392

1
KHA3000
37
Overview of the Product
Over
vie
w
●
Selects whether to measure harmonic groups
This product can support older revisions of Limitation Standards and Measuring
Technique Standards (Meas. Technic). Regarding Measuring Technique standards, the
user can select whether or not to perform the measurement of harmonic groups.
●
Test conditions can be customized.
The conditions can easily be set for the EUT. Test conditions set can be saved in a file. For
similar equipment under tests, time-consuming settings can be simplified. Loss due to
setting error can be eliminated. The menus can be displayed either in Japanese or
English.
●
Assist function, providing security for users who are not familiar with EMC or test
standards
An assist function is available to support operation. Complex terms can also be
referenced.
●
Measures in-rush current
In-rush current of up to 160 A can be measured. Higher current can be measured if an
external current transformer is used.
●
Scaling function
When an external current sensor or PT (potential transformer) is used, the scaling ratio of
the measurement sensitivity can be set.
The scale of the graphic display is adjusted to the scaling value set.
●
Use of 32-bit FFT
Very small harmonic current values can be accurately measured with minimum operation
errors.
●
External memory
CompactFlash card and USB flash drive are supported.
●
Remote control interface
The GPIB, RS232C, and USB are provided. They can be selectively used.
SCPI commands are used.
●
Traceability
Measuring instruments compliant with ISO/IEC17025 are used to tune and test this
product. Although calibration of this product is not compliant with ISO/IEC17025, we
collaborate with foreign accredited calibration organizations, and so accredited calibration
is possible.
●
Multi-outlet unit (option)
This unit is used for EUT that has a power cord with a plug. It can connect to devices with
a wide range of plugs used in various countries. This unit is used for single-phase
equipment.
●
Application software SD006-KHA Harmonics Analyzing Suite (sold separately)
This software executes and controls the setting and testing of this product. It can control
the AC Power Supply used in the test. Harmonic spectra and current and voltage
waveforms can be printed in reports. Japanese and English languages are supported.