Kikusui KHA3000, Operation Manual, Page: 298 / 392

298
KHA3000
Measurements in General
CURR:SCAL:ECSR
Sets the EXT-CS Ratio of each input phase (channel).
Command
[SENSe:]CURRent:SCALing:ECSRatio<numeric>,<numeric>,<numeric>
[SENSe:]CURRent:SCALing:ECSRatio?
Parameter Value: 0.250 to 2500.000 (The default is 25.000)
The successive <numeric> part is in the order of L1, L2 and L3.
Unit: None
Response
Returns the EXT-CS Ratio in the <NR3>, <NR3>, <NR3> format. The successive <NR3>
part is in the order of L1, L2 and L3.
CURR:SCAL:PADJ
Sets the phase adjustment value for the external sensor of each input phase (channel).
Command
[SENSe:]CURRent:SCALing:PADJustment<numeric>,<numeric>,<numeric>
[SENSe:]CURRent:SCALing:PADJustment?
Parameter Value: -180.00 to 180.00 (The default is 0.00)
The successive <numeric> part is in the order of L1, L2 and L3.
Unit: DEG
Response
Returns the phase adjustment value for the external sensors in the <NR3>, <NR3>, <NR3>
format. The successive <NR3> part is in the order of L1, L2 and L3.
VOLT:SCAL:PTR
Sets the PT Ratio of each input phase (channel).
Command
[SENSe:]VOLTage:SCALing:PTRatio <numeric>,<numeric>,<numeric>
[SENSe:]VOLTage:SCALing:PTRatio?
Parameter Value: 0.001 to 100.000 (The default is 1.000)
The successive <numeric> part is in the order of L1, L2 and L3.
Unit: None
Response
Returns the PT Ratio in the <NR3>, <NR3>, <NR3> format. The successive <NR3> part is
in the order of L1, L2 and L3.
CURR:SCAL:RANG
VOLT:SCAL:RANG
Queries the current range and voltage range of each channel after the scaling is set.
Command
[SENSe:]CURRent:SCALing:RANGe?
[SENSe:]VOLTage:SCALing:RANGe?
Response
Returns the current and voltage ranges after the scaling in the <NR3>, <NR3>, <NR3>
format.
The successive <NR3> part is in the order of L1, L2 and L3.
** RST RST
** RST RST
** RST RST