Kikusui KHA3000, Operation Manual, Page: 92 / 392

92
KHA3000
Test Conditions Setting Displays
Two types of display are available for setting test conditions. Choose either one.
• HA-Test Conditions List display for setting test conditions while checking the test
conditions that were selected in the menu
• HA-Observation and Test Conditions display for setting test conditions during
measurement
Using the HA-Test Conditions List Display (Setting with
viewing test conditions)
1
Press the HA key.
The HA key LED illuminates and the HA-Test Conditions List display appears. If the
display is not shown, proceed to the following step.
If the display does not appear by pressing the HA key
A dialog box “ Can ’ t execute during test/analysis. Please operate it after ending ” is displayed
and the display switches to the test ending menu.
p. 146
While the test status display (in the upper left of the screen, “ Set ” in the case of the
figure shown above) is “ Test ” or “ Analysis, ” pressing the HA key does not display the
HA-Test Conditions List display. Because displaying the HA-Test Conditions List display
starts a new test with the test conditions changed, the test that has been executed
needs to be terminated.
2
Press the F3 key (Exit) in the Ending menu.
The test ends. The test status indication on the screen switches from “ Analysis ” to “ Set. ”
If test results have not been saved with the F1 key (Save), the dialog box and menu for
saving are displayed. To save the test results, select F1 (Yes); otherwise, select F2 (No).
3
Press the HA key.
The HA key LED illuminates and the HA-Test Conditions List display appears.
See