Kikusui KHA3000, Operation Manual, Page: 317 / 392

13
KHA3000
317
Voltage Fluctuation Measurement Mode (61000-3-11)
Rem
ote Contr
ol
VFL:IEC311:JFAC:DC
VFL:IEC311:JFAC:DMAX
VFL:IEC311:JFAC:DT33
VFL:IEC311:JFAC:PLT
VFL:IEC311:JFAC:PST
Sets the five items of limit values to be used for judgment (dc, dmax, d(t)>3.3%, Plt, Pst).
Setting an item to ON (1) enables the corresponding limit value as a condition for judgment.
Command
VFLuctuation:IEC311:JFACtor:DC {ON|OFF|1|0}
VFLuctuation:IEC311:JFACtor:DC?
VFLuctuation:IEC311:JFACtor:DMAX {ON|OFF|1|0}
VFLuctuation:IEC311:JFACtor:DMAX?
VFLuctuation:IEC311:JFACtor:DT33 {ON|OFF|1|0}
VFLuctuation:IEC311:JFACtor:DT33?
VFLuctuation:IEC311:JFACtor:PLT {ON|OFF|1|0}
VFLuctuation:IEC311:JFACtor:PLT?
VFLuctuation:IEC311:JFACtor:PST {ON|OFF|1|0}
VFLuctuation:IEC311:JFACtor:PST?
Parameter Value: ON(1) Yes (default)
OFF(0) No
Response
Returns whether each limit value item is enabled for judgment in the <NR1> format.
Setting the Margins
VFL:IEC331:MARG:D
Sets the margin for the limit value of dc, dmax or d(t)>3.3%. Set a relative value of the
reference limit value (100). The setting range is 10 to 100. For instance, specify 80 to set the
margin to 80 % of the standard limit value. For d(t)>3.3%, set a margin for the limit value of
the time exceeding d(t)>3.3%.
Command
VFLuctuation:IEC33:MARGin:D {<numeric>|MIN|MAX}
VFLuctuation:IEC33:MARGin:D?
Parameter Value: 10 to 100 (The default is 100.)
Unit: PCT
Response
Returns the margin for the limit value of dc, dmax or d(t)>3.3% in the <NR3> format.
** RST RST
** RST RST