Kikusui KHA3000, Operation Manual, Page: 218 / 392

218
KHA3000
When the Test Time Expires (61000-3-11)
●
When the result of the general judgment is acceptable (PASS,the progress bar is green),
follow the procedure described below.
p. 214
●
When the result of the general judgment is not acceptable (FAIL,the progress bar is red)
and you have employed an impedance to declare that the power supply to be connected
requires a current capacity of 100 A or more per phase as the equipment operating
condition (hereafter called
“ 100 A power supply declaration ” )
In this case, set the impedance again and re-execute the test for the 61000-3-11 standard
to declare the maximum permissible system impedance (Zmax) of the power supply to be
connected. For details, see "Setting the Impedance Again (61000-3-11)".
p. 219
●
When the result of the general judgment is not acceptable (FAIL,the progress bar is red)
and you have employed an impedance to declare the maximum permissible system
impedance (Zmax) of the power supply to be connected as the equipment operating
condition (hereafter called
“ Zmax declaration ” )
In this case, obtain the maximum permissible system impedance (Zmax). For details, see
"Maximum permissible system impedance (Zmax)".
When the General Judgment is PASS
1
Press the F1 key (OK).
The test ending menu shown below is displayed and the buzzer stops.
2
When terminating the test, select an item you want to operate from the
test ending menu.
p. 220
For details on the selection, see "Overview of the Test Ending Menu".
S ee
S ee
Display after the test ends
Test status display
Switches from “ Test ” to “ Analysis. ”
The progress bar extends to the right end and its color changes
according to the judgment.
PASS The result of the general judgment is acceptable (the progress bar is
green).
WARNING The result of the general judgment is acceptable but the margin is
exceeded (the progress bar is yellow).
FAIL The result of the general judgment is not acceptable (the progress bar is
red).
S ee