Keysight Technologies InfiniiVision 3000 X Series, User Manual

Page: 307 / 432

Utility Settings
20
Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide 307
Configuring the [Quick Action] Key
The [Quick Action] key lets you perform common, repetitive actions by pressing a
single key.
To configure the [Quick Action] key:
1 Press [Utility] > Quick Action > Action ; then, select the action that should be
performed:
• Off — disables the [Quick Action] key.
• Quick Measure All — displays a popup containing a snapshot of all the single
waveform measurements. The Source softkey lets you select the waveform
source (which also becomes the source selection in the Measurement
Menu). See Chapter 14 , “Measurements,” starting on page 211.
• Quick Print — prints the current screen image. Press Settings to set up the
printing options. See Chapter 19 , “Print (Screens),” starting on page 285.
• Quick Save — saves the current image, waveform data, or setup. Press Settings
to set up the save options. See Chapter 18 , “Save/Recall (Setups, Screens,
Data),” starting on page 273.
• Quick Recall — recalls a setup, mask, or reference waveform. Press Settings to
set up the recall options. See Chapter 18 , “Save/Recall (Setups, Screens,
Data),” starting on page 273.
• Quick Freeze Display — freezes the display without stopping running
acquisitions or un-freezes the display if currently frozen. For more
information, see "To freeze the display" on page 133.
• Quick Trigger Mode — toggles the trigger mode between Auto and Normal, see
"To select the Auto or Normal trigger mode" on page 176.
• Quick Clear Display — clears the display, see "To clear the display" on
page 132.
Once the [Quick Action] key is configured, you simply press it to perform the
selected action.