Keysight Technologies InfiniiVision 3000 X Series, User Manual

Page: 232 / 432

232 Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide
14
Measurements
X at Min Y
X at Min Y is the X axis value (usually time) at the first displayed occurrence of the
waveform Minimum, starting from the left-side of the display. For periodic signals,
the position of the minimum may vary throughout the waveform. The X cursor
shows where the current X at Min Y value is being measured.
X at Max Y
X at Max Y is the X axis value (usually time) at the first displayed occurrence of the
waveform Maximum, starting from the left-side of the display. For periodic signals,
the position of the maximum may vary throughout the waveform. The X cursor
shows where the current X at Max Y value is being measured.
See Also • "To measure the peak of an FFT" on page 232
To measure the peak of an FFT
1 Select FFT as the Operator in the Waveform Math Menu.
2 Choose Math: f(t) as the source in the Measurement Menu.
3 Choose Maximum and X at Max Y measurements.
Maximum units are in dB and X at Max Y units are in Hertz for FFT.
Count Measurements
• "Positive Pulse Count" on page 232
• "Negative Pulse Count" on page 233
• "Rising Edge Count" on page 233
• "Falling Edges Count" on page 233
Positive Pulse Count
The Positive Pulse Count measurement is a pulse count for the selected waveform
source.