Juniper Internet Router M160, Hardware Manual

Page: 102 / 312

M160 Internet Router Hardware Guide
While the chassis is bolted to the pallet, you can use a forklift or pallet jack
to move it.
2.
Position the crate so that the arrows are pointing up.
3.
Twist open the locking tabs that secure the crate to the pallet and the front
panel to the side panels.
4.
Remove the front panel from the crate, then lift the top and sides off the pallet
as a unit. See Figure 31.
5.
Remove the plastic cover, then the foam and Quick Start that are sitting on top
of the chassis. The installation handle and accessory box are embedded in
cutouts in the foam.
6.
Open the accessory box and verify the contents against the parts inventory on
the label attached to the box.
7.
Verify the chassis components received against the packing list included with
the router. A generic parts inventory appears in Table 21.
8.
Use a 1/2-in. open-end or socket wrench to loosen and remove the bolts on the
brackets that attach the chassis to the pallet. If a 1/2-in. tool is not available,
use pliers or an adjustable wrench rather than a fixed-size metric wrench.
9. Use a Phillips screwdriver to loosen the screws that secure the brackets to the
sides of the chassis, and remove the brackets. Store the brackets, screws,
and bolts inside the accessory box.
10.
Save the shipping crate, packing materials, and pallet in case you later need
to move or ship the router.
78
Unpacking the Router