1 Safety
6
1.3 Intended
use
This device is intended for the following uses:
•
For the transmission of fluid, pulpy or pasty measuring
media with electrical conductivity.
•
For volume flow measurement (in operating conditions).
•
For mass flow measurement (based on a non-adjustable
density value).
The device has been designed for use exclusively within the
values stated on the rating plate and within the technical limit
values specified on the data sheets.
Compliance with the following items is required when using media
for measurement:
•
Parts that make contact with the medium such as
measuring electrodes, lining, grounding electrodes,
grounding plates or protective panes must not be
adversely affected by the chemical and physical
properties of the medium being measured during
operation.
•
Media with unknown properties or abrasive media may
only be used if the owner/operating authority can perform
regular and suitable tests to ensure the safe condition of
the device.
•
Ensure compliance with the specifications on the rating
plate.
•
Prior to using the devices with corrosive or abrasive
media, the owner must check the level of resistance of all
parts that come into contact with the medium being
measured.
The manufacturer will be happy to assist you with the
selection but cannot be held liable.
1.4 Improper
use
The following are considered to be instances of improper use of
the device:
•
Operation as a flexible compensating adapter in piping,
for example for compensating pipe offsets, pipe
vibrations, pipe expansions, etc.
•
For use as a climbing aid, for example for mounting
purposes.
•
For use as a bracket for external loads, for example as a
support for piping, etc.
•
Material application, for example by painting over the
housing, name plate or welding/soldering on parts.
•
Material removal, for example by spot drilling the housing.
1.5 Warranty
provisions
Using the device in a manner that does not fall within the scope of
its intended use, disregarding this manual, using underqualified
personnel, or making unauthorized alterations releases the
manufacturer from liability for any resulting damage. This renders
the manufacturer's warranty null and void.
Change from two to one column
Summary of Contents for 406060
