JUMO 406060, Operating Manual

Page: 8 / 116

2 Design and function
8
2.1.2 JUMO flowTRANS MAG H10
Integral mount design Remote mount design
1
Sensor
2
External transmitter
Figure 2: Designs
Sensor
Model JUMO flowTRANS MAG H10
Design Integral mount design (406061/1), remote mount design (406061/2)
Measuring accuracy for liquids 0.5 % of rate
Permissible temperature of the medium
being measured, T
medium
− 25 to 130 °C ( − 13 to 266 °F)
Minimum conductivity > 20 µS/cm
Nominal pressure rating PN 10 to 40, ASME CL 150, 300, JIS 10K
Nominal diameter DN 3 to 100 (
¹⁄₁₀
in. to 4 in.)
Process connection Wafer-type design:
Flange in acc. with DIN, ASME or JIS:
Threaded pipe fitting in acc. with DIN 11851:
Weld stubs:
Tri-Clamp in acc. with DIN 32676:
Tri-Clamp in acc. with ASME BPE:
External thread in acc. with ISO 228 / DIN 2999:
DN 3 to 100 (
¹⁄₁₀
to 4 in.)
DN 3 to 100 (
¹⁄₁₀
to 4 in.), PN 10 to 40
DN 3 to 100 (
¹⁄₁₀
to 4 in.), PN 10 to 40
DN 3 to 100 (
¹⁄₁₀
to 4 in.), PN 10 to 40
DN 3 to 100 (
¹⁄₁₀
to 4 in.), PN 10 to 16
DN 3 to 100 (
¹⁄₁₀
to 4 in.), PN 10
DN 3 to 25 (
¹⁄₁₀
to 1 in.), PN 16
Process connection material Stainless steel
Lining material PFA (vacuum-proof)
Electrode material CrNi steel 1.4571 (AISI 316Ti), 1.4539 [904L], Hastelloy B, Hastelloy C, platinum-iridium, tantalum, titanium
IP degree of protection Integral mount design: IP 65 / IP 67
Remote mount design: IP 65 / IP 67 / IP 68 (only for sensors)
Approvals
Pressure Equipment Directive 2014/68/EU Conformity assessment in accordance with category III, fluid group 1
Hygiene approvals FDA-compliant materials
Further approvals Are available in the download section at www.jumo.de, or on request.