JUMO 406060, Operating Manual

Page: 15 / 116

4 Transport and storage
15
4.3 Storing the device
Bear the following points in mind when storing devices:
• Store the device in its original packaging in a dry and
dust-free location.
• Observe the permitted ambient conditions for transport
and storage.
• Avoid storing the device in direct sunlight.
• In principle, the devices may be stored for an unlimited
period. However, the warranty conditions stipulated in the
order confirmation of the supplier apply.
Storage temperature range
-30 to 70 °C (-22 to 158 °F)
The ambient condition requirements for transport and storage of
the device correspond to the ambient condition requirements for
the operation of the device.
Compliance with the information on the data sheet for the device
is required.
4.4 Returning devices
NOTE
Improperly returned devices.
The EU Directive governing hazardous materials dictates that
the owners of any hazardous waste are also responsible for
disposing of it. All devices delivered to the manufacturer must
be free from any hazardous materials (acids, alkalis, solvents,
etc.).
All documents required for returning the device as well as the
manufacturer’s return address can be found at
http://produktruecksendung.jumo.info.
The following applies to returning devices for repair or
recalibration purposes:
• Use the original packaging or a secure transport
container.
• Enclose the filled out repair form for the device.
In addition, the following applies to devices that came in contact
with hazardous materials:
• Enclose the filled out repair form and the completed and
signed decontamination certificate.
Any hazardous material in the cavities, e.g. between the meter
tube and the housing, is to be rinsed out and neutralized.
These activities must be confirmed in writing in the
decontamination certificate.