JUMO 406060, Operating Manual

Page: 11 / 116

3 Product identification
11
Change from two to one column
3 Product identification
3.1 Name plate
3.1.1 Integral mount design
1
Model number *
2
Order number / Serial number for identification by the manufacturer
3
Nominal diameter and nominal pressure rating
4
Material: Flange / Lining / Electrode
5
T
med
= maximum permissible temperature of medium being measured
T
amb
= maximum permissible ambient temperature
6
Calibration value, Q
max
DN
7
Calibration value, Ss (span)
Calibration value, Sz (zero point)
8
Excitation frequency of sensor coils
9
Software version
j
Year of manufacture
k
CE mark
l
Protection class according to EN 60529
m
Supplementary information: EE = grounding electrodes, TFE = partial
filling electrode
n
Label indicating whether the pressure vessel is subject to the Pressure
Equipment Directive (PED).
Information on the relevant fluid group.
Fluid group 1 = hazardous fluids, liquid, gaseous. (Pressure Equipment
Directive = PED).
If the pressure equipment is not subject to the Pressure Equipment
Directive 2014/68/EU, it is classified in accordance with SEP (= sound
engineering practice) as per Art. 3, Para. 3, of the PED.
If no such information is present, it means that the device does not claim
to comply with the requirements of the Pressure Equipment Directive
2014/68/EU. Water supplies and connected equipment accessories are
classed as an exception in accordance with guideline 1/16 of
Art. 1, Para. 3.2 of the Pressure Equipment Directive.
o
Maximum voltage at the inputs and outputs
p
Manufacturer
q
Order number
* Detailed information about the technical design can be found on the data sheet or the order confirmation.
Figure 4: Rating plate