JUMO 406060, Operating Manual

Page: 88 / 116

12 Specification
88
12.5 JUMO flowTRANS MAG H10 – Material load
for process connections
The limits of the permissible measuring medium temperature
(T
medium
) and permissible pressure (P
medium
) are calculated on
the basis of the liner and flange material used in the device (see
device name plate).
12.5.1 Minimum permissible operating pressure
The minimum permissible operating pressure (P
medium
)
dependent on the temperature of the medium being measured
(T
medium
) and the liner material is indicated in the table below.
Liner material Nominal diameter P
medium
[mbar abs]
T
medium
*
PFA DN 3 to 100
(¹ ⁄ ₁₀ to 4 in.)
0 < 130 °C (266 °F)
* For CIP/SIP cleaning, higher temperatures are permitted for limited periods;
refer to table Maximum permissible cleaning temperature on page 87.
Approvals for liners available on request; please contact the
manufacturer.
12.5.2 Overview of material load
Process
connection
DN P
medium
max. T
medium
Wafer type DN 3 to 50
(¹ ⁄
₁₀
to 2 in.)
40 bar (580 psi) − 25 to 130 °C
( − 13 to 266 °F)
DN 65 to 100
(2 ½ to 4 in.)
16 bar (232 psi)
Weld stub
DIN 2463,
ISO 1127,
DIN 11850
DN 3 to 40
(¹ ⁄ ₁₀ to 1 ½ in.)
40 bar (580 psi) − 25 to 130 °C
( − 13 to 266 °F)
DN 50, DN 80
(2 in., 3 in.)
16 bar (232 psi)
DN 65, DN 100
(2 ½ in., 4 in.)
10 bar (145 psi)
Weld stub
SMS 1145
DN 25,
DN 40 to 100
(1 in.,1,5 to 4 in.)
6 bar (87 psi) − 25 to 130 °C
( − 13 to 266 °F)
Threaded pipe
fitting
DIN 11851
DN 3 to 40
(¹ ⁄
₁₀
to 1 ½ in.)
40 bar (580 psi) − 25 to 130 °C
( − 13 to 266 °F)
DN 50, DN 80
(2 in., 3 in.)
16 bar (232 psi)
DN 65, DN 100
(2 ½ in., 4 in.)
10 bar (145 psi)
Tri-Clamp
DIN 32676
DN 3 to 50
(¹ ⁄ ₁₀ to 2 in.)
16 bar (232 psi) − 25 to 130 °C
( − 13 to 266 °F)
DN 65 to 100
(2 ½ to 4 in.)
10 bar (145 psi)
Tri-Clamp
ASME BPE
DN 3 to 80
(¹ ⁄
₁₀
to 3 in.)
10 bar (145 psi) − 25 to 121 °C
( − 13 to 250 °F)
DN 100 (4 in.) 8.6 bar (124.7 psi)
External thread
ISO 228, DIN 2999
DN 3 to 25
(¹ ⁄
₁₀
to 1 in.)
16 bar (232 psi) − 25 to 130 °C
( − 13 to 266 °F)
Weld stub
OD tubing
DN 3 to 50
(¹ ⁄
₁₀
to 2 in.)
10 bar (145 psi) − 25 to 130 °C
( − 13 to 266 °F)