JDS Uniphase CellAdvisor JD780A Series, User Manual

Page: 51 / 592

JD780A Series Analyzers
Getting Started
51
NOTE
If your network does not support the automatic IP addressing, contact your network
administrator to get a fixed IP address assigned to your instrument.
–
For wireless LAN connection:
a. Select System Configuration > Remote Interface > Wi-Fi .
b. Select the currently connected network from the list, and then press the Select soft key.
c. Record the IP address displayed at the bottom.
–
For Bluetooth tethering on an Android-based smartphone or Personal Hotspot on an
iOS-based smartphone:
a. Select System Configuration > Remote Interface > Bluetooth .
b. Record the IP address assigned to your instrument under Connected Service.
3.
Press the SYSTEM hot key again.
4.
Select System Configuration > Remote Interface .
5.
Toggle the Web Remote soft key and select On to enable it.
6.
Open a Web browser on your computer or mobile device and then enter the IP address you have
obtained in step
2 , depending on the TCP/IP protocol. Examples are the following:
–
IPv4: 10.82.26.254 (put the entire the address including dots in the URL bar)
–
IPv6: [ fe80::21b:22ff:fea1:924a ] (make sure to add the brackets
“
[
” and “
]
” and put the
entire address including colons in the URL bar)
Your instrument
’s live screen appears on the Web browser as shown like
Figure 5 or Figure 6 .
NOTE
The IPv6 protocol is supported on the operation system
“Windows Vista” and later.
Figure 5 Example of Web remote on iPhone