JDS Uniphase CellAdvisor JD780A Series, User Manual

Page: 498 / 592

JD780A Series Analyzers
498
Using Cable and Antenna Analyzer
9.
Connect the Reflection/RF Out port and the RF In port for the Cable and Antenna Analyzer with
the test cable and the proper adapter as illustrated in Figure 248-2 .
10.
Press the Continue soft key to continue calibration.
The calibration progress bar appears.
After completion, the calibration status on the screen changes to
ON .
O-S-L-Thru calibration using electronic EZ-Cal kit for vector measurements
Figure 249 illustrates the connection using the EZ-Cal kit for calibration in Vector measurements.
Figure 249 2-port calibration connection with EZ-Cal in vector measurements
1) 2)
Procedure
1.
Connect an extension cable, if necessary, to the Reflection/RF Out port of the instrument.
2.
Connect your EZ-Cal to the other open end of the extension cable or to your instrument's
Reflection/RF Out port directly.
3.
Connect the USB cable to the side of the EZ-Cal and then to the USB Host port to power the
e-calibration kit as illustrated in Figure 249-1 .
The instrument detects the EZ-Cal automatically and displays the EZ-Cal icon.
4.
Press the MEASURE SETUP hot key.
5.
Press the Calibrate soft key.
The on-screen instruction appears to guide you through the e-calibration.
6.
Connect the Reflection/RF Out port and the RF In port for the Cable and Antenna Analyzer with
the test cable and the proper adapter as illustrated in Figure 249-2 .
7.
Press the Continue soft key to continue calibration.
The calibration progress bar appears.
After completion, the calibration status on the screen changes to
ON .
Scalar measurement
Figure 250 illustrates the connection for calibration in Scalar measurements.