JDS Uniphase CellAdvisor JD780A Series, User Manual

Page: 326 / 592

JD780A Series Analyzers
326
Using LTE
– TDD Signal Analyzer
Figure 150 Raster image overlaid on the route map in LTE-TDD OTA signal analyzer
Performing RAN performance testing
The JD780A series provides the optional feature that lets you conduct correlated uplink and downlink
testing with your instrument connected to your mobile device via Bluetooth. The RANAdvisor TrueSite
application installed on your smartphone collects data and transfers uplink data based on your
parameter settings and then your instrument consolidates the data into the measurement results and
displays them as performance indicators. It helps you troubleshoot a problem and identify the cause of
the problem fast.
To perform this testing, you need both of these installed: the license for the option 015 LTE-TDD RAN
Performance Indicator on your instrument and the RANAdvisor TrueSite app with the license on your
smartphone.
Preparing your smartphone for remote control via Bluetooth
To set up a Bluetooth connection and enable data collection with remote control properly, you need to
pair your instrument with your smartphone and set the app
’s local Bluetooth control option to Slave
once at the beginning.
Procedure
1.
Connect a Bluetooth adapter to the USB Host port and an Omni antenna to the RF In port of your
CellAdvisor instrument.
The instrument detects the adapter and turns on its Bluetooth automatically.
2.
Make your smartphone visible to your instrument by doing the following steps:
a. On your smartphone, turn on Bluetooth .
b. Check the checkbox for Visible to all nearby Bluetooth devices to enable this option.
3.
Pair with your smartphone by doing the following steps:
a. On your instrument, press the MEASURE SETUP hot key.
b. Press the Bluetooth Connect soft key.
c. Press the Scan soft key.
The instrument lists detected Bluetooth devices with their MAC address and status.