Intergraph InterRAID-12, Hardware User'S Manual

Page: 100 / 195

85
Option Description
Synchronous
Negotiation Choose this option to enable or disable synchronous negotiation for the
selected physical device. The default is Enabled.
SCSI-2
Command
Tagging Choose this option to set the number of queue tags per command to 2, 3,
or 4, or to disable command tagging. The default setting is 4 queue tags.
SCSI Channel
Choose the SCSI Channel option from the Objects menu to select a SCSI channel on the
currently selected controller.
The following table describes the SCSI Channel options.
Option Description
Terminate
High 8 Bits Choose this option to enable termination on the selected channel for the
upper eight bits and disable termination on the controller for the lower
eight bits. This setting is required if the selected SCSI channel is
terminated with 8-bit devices at both ends.
Terminate
Wide Channel Choose this option to enable wide channel termination for the selected
channel. This is required if the MegaRAID controller is at one end of the
SCSI bus for the selected channel.
Disable
Termination Choose this option to disable termination on the MegaRAID controller for
the selected channel. This option should be used if the selected SCSI
channel is terminated with Wide devices at both ends.
Set PowerOn
Defaults Choose this option to have the MegaRAID controller examine its SCSI
channels and to set its termination automatically.
Format Menu
Choose Format from the Management menu to low-level format one or more physical drives.
WARNING Formatting a hard drive destroys all data on the drive.