Intergraph InterRAID-12, Hardware User'S Manual

Page: 94 / 195

79
Startup Sequence
When the system boots, press
CTRL
+
M
when the following appears:
MEGARAID CONTROLLER BIOS Version x.xx Aug 1, 1996
Host Adapter-1 Firmware Version x.xx DRAM Size 8 MB
0 Logical Drives found on the Host Adapter
0 Logical Drives handled by BIOS
Press <Ctrl><M> to run MegaRAID BIOS Configuration Utility
NOTE If you do not press
CTRL
+
M
within a few seconds of the prompt, the system continues the
normal boot procedure.
For each MegaRAID controller in the system, the firmware version, DRAM size, and the
status of logical drives on that controller displays. When you press
CTRL
+
M
, the following
Management Menu displays:
-------------- Management Menu ----------------
Configure
Initialize
Objects
Format
Rebuild
Check Consistency
Select Adapter
Disable BIOS
Management Menu Options
The Management main menu options are as follows:
Option Description
Configure Configures physical arrays and logical drives
Initialize Initializes one or more logical drives
Objects Individually accesses controllers, logical drives, and physical drives
Format Low-level formats a hard disk drive
Rebuild Rebuilds a failed disk drive
Check
Consistency Verifies that the redundancy data is correct in logical drives using
RAID level 1, 3, or 5
Select Adapter Selects a MegaRAID host adapter (controller)
Disable BIOS Disables the BIOS