Intergraph InterRAID-12, Hardware User'S Manual

Page: 16 / 195

1
1 Getting Started
The InterRAID-6, InterRAID-8, and InterRAID-12 disk array cabinets are easy to set up and
connect to an Intergraph desktop or deskside system. This document assumes the system
base unit is already set up.
NOTE To unpack and connect the rack-mount InterRAID-8 cabinet, refer to the hardware
documentation for the rack-mounted system.
Unpacking the Equipment
Carefully unpack the equipment. The carton contains the following items:
u
InterRAID cabinet
u
Disk drive box with RAID disk drives
u
Key
u
Diskettes containing configuration and utility software
u
Accessory pack
The accessory pack, included with the cabinet, contains the following items:
u
InterRAID cabinet power cord
u
RAID SCSI cable
u
Four plastic feet
u
Eight cap head hex screws
u
Hex wrench
u
Disk drive labels
u
Drive Labeling instruction sheet
u
Power Supply Cord Selection instruction sheet
u
Feet Installation instruction sheet
u
Antistatic Handling instruction sheet
u
Rubber pads (InterRAID-8 and InterRAID-12)
u
Blanking plate (InterRAID-8)