Intergraph InterRAID-12, Hardware User'S Manual

Page: 71 / 195

56
03. View/Update Configuration
Use the View/Update Configuration option in the DACCF Main Menu to view, edit, or
update an existing configuration, add more disk drives, or use existing standby drives as
normal drives. You can change the write policy of any system disk drive at any time by
selecting this option.
When you select View/Update Configuration, the following menu displays.
MYLEX Disk Array Controller-Configuration Utility Version X.XX X/XX/XX
2 Channel - 7 Target DAC960P #1 Firmware version x.xx
Choose this option to view existing pack(s) OR create,
arrange, cancel one or more additional packs
Use Cursor keys for selection, hit <ENTER> to select, <ESC> to Exit
View/Update Configuration
1. Define Pack
2. Define System Drive
Define Pack
The existing packs can be canceled, deleted or changed. The newly added drives (RDY) and
the existing standby (SBY) drives can be created into packs. You can define a maximum of
eight (8) physical drives per pack. If you wish to cancel a pack, and more than one pack is
defined, be sure to cancel all packs in reverse order. For example, if you define three packs
(A, B, C), be sure to cancel pack C before canceling packs B and A, otherwise a “wrong
order” error message appears.
NOTE For creating and arranging packs, refer to “02. New Configuration” in this chapter.
When you select Define Pack, a display similar to the following appears.