Intergraph InterRAID-12, Hardware User'S Manual

Page: 33 / 195

18
For InterServe 650, 660 systems, use the following table as a guide to install any
secondary RAID controller boards.
Number of
RAID
Controllers
Primary Secondary Secondary Secondary
One PCI Slot 7 - - -
Two PCI Slot 7 PCI Slot 6 - -
Three PCI Slot 7 PCI Slot 6 PCI Slot 5 -
Four PCI Slot 7 PCI Slot 6 PCI Slot 5 PCI Slot 4
Expanding the System
This section provides instructions to expand your InterServe 6xx system with additional
InterRAID-8 disk arrays. The following describes unpacking, placing cabinets, installing
internal expansion cables, and installing multiple expansions.
Unpacking
Carefully unpack the InterRAID-8 Expansion Solution equipment, and verify that you have
the following items:
u
InterRAID-8 cabinet
u
Key for cabinet door
u
RAID disk drives
u
Diskettes containing configuration and utility software
u
Documentation
u
Antistatic wrist strap
u
Accessory pack containing a power cord, RAID SCSI cables, four plastic feet, eight cap
head screws, one hex wrench, disk drive labels, rubber pads, a blanking plate, a Drive
Labeling sheet, a Feet Installation sheet, a Power Supply Cord Selection sheet, and an
Antistatic Handling sheet
The Expansion Solution equipment may also include the following items:
u
RAID controller board
u
Internal expansion cable
u
RAID SCSI cable