108
6. Remove the diskette containing the MegaRAID Power Console utility from the disk
drive.
7. Reboot the system.
8. To run Power Console, select the Power Console icon.
Overview
Power Console allows you to control and monitor the status of hard disk drives and RAID
enclosure and to store information in the Windows NT Event Viewer. Power Console
executes from any workstation and runs under Microsoft Windows NT. The topics discussed
in this chapter include:
u
Power Console icons
u
Logical and Channel icons
u
Defining Power Console menu options
u
Adapter menu
u
Physical Drv menu
u
Logical Drv menu
u
Logical Drive menu
u
Removing a drive
u
Designating drives as hot spares
u
Securing Power Console
u
Saving configuration to floppy
You can set up the logical drives as discussed in Chapter 6 using the MegaRAID BIOS
Configuration utility. If you have more than one MegaRAID controller in a host system, be
sure to configure at least one logical drive on every MegaRAID controller in the host system
before you access the controllers from Power Console.
The number assigned to the controller changes according to the number of installed
controllers. Power Console lists the controllers starting at the controller in the lowest PCI
slot to the controller in PCI slot 7, counting them incrementally from 0 to 3. More details on
this is provided under “Defining Power Console Menu Options” in this chapter.
Double-click on the Power Console icon from the MegaRAID program group on the
Windows screen. The following dialog displays:
Summary of Contents for InterRAID-12
