Intel 480T, User Manual

Page: 80 / 367

78
C H A P T E R 4 Configuring Switch Ports
disable learning ports <portlist> Disables MAC address learning on one or more
ports for security purposes. If MAC address
learning is disabled, only broadcast traffic, EDP
traffic, and packets destined to a permanent
MAC address matching that port number, are
forwarded to the port. The default setting is
enabled.
disable ports <portlist> Disables a port. Even when disabled, the link is
available for diagnostic purposes.
disable sharing <port> Disables a load-sharing group of ports.
enable jumbo-frame ports [<portlist> | all] Enables reception and transmission of jumbo
frames. A jumbo frame is dropped if it is
received on a port with jumbo frames disabled,
or if the jumbo frame needs to be forwarded out
of a port that has jumbo frames disabled.
enable learning ports <portlist> Enables MAC address learning on one or more
ports. The default setting is enabled.
enable ports <portlist> Enables a port.
enable sharing <port> grouping <portlist>
{port-based | address-based | round-robin} Defines a load-sharing group of ports. The ports
specified in <
portlist
> are grouped to the
master port. Optional load-sharing algorithms
include:
•
port-based
— Uses the ingress port as
criteria for egress port selection.
•
address-based
— Uses addressing
information as criteria for egress port
selection.
•
round-robin
— Forwards packets to all
egress ports in a round-robin fashion.
If not specified, port-based load-sharing is used.
Table 19: Port Commands (continued)
Command Description